求高人解答富马酸二甲酯的执行标准，安全说明书(MSDS)及生产工艺

富马酸二甲酯的执行标准： 1、“DMF”指化学品富马酸二甲酯，IUPAC（国际纯化学与应用化学联盟）名称为Dimethyl （E）-butenedioate，CAS（化学物质登记号）编号：624-49-7，EINECS（欧洲现有商用化学物质目录信息系统）编号：210-849-0。 2、“产品”指第2001/95/EC号指令第2（a）条中定义的任何产品； 3、“含有富马酸二甲酯的产品”指如下产品或产品零件： （i）声明了富马酸二甲酯的存在率，如在一个或多个小袋子上；或 （ii）富马酸二甲酯的浓度大于每公斤该产品或产品零件重量0.1毫克； 4、“投放市场”指第一次在共同体市场销售； 5、“在市场上销售”指在商业活动过程中提供用于在共同体市场上经销、消费或使用，不管是有偿还是无偿。 国家皮革质量监督检验中心（浙江）于2008年开始重点前瞻性研究应对这一技术性贸易措施的技术，于2008年下半年已经率先提供这一测试技术服务。2008年以来，欧洲相继发生中国皮革产品使用含DMF防霉剂疑致消费者过敏事件，主要涉及的产品包括椅子和鞋，2008年底法国、西班牙就禁止含有DMF的椅子进口，上月欧盟国家通过了禁止进口DMF的决定。

MSDS 不知道你是想要什么版本的MSDS， 一般要英文的多 ， 就给你你个英文吧 ， **** MATERIAL SAFETY DATA SHEET ****

N,N-Dimethylformamide, for HPLC

**** SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ****

MSDS Name: N,N-Dimethylformamide, for HPLC

Catalog Numbers:

27960-0000, 27960-0010, 27960-0025

**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+-----------+---------------+

| CAS# | Chemical Name |% | EINECS# |Haz Symbols| Risk Phrases |

|----------------|--------------------------------------|----------|-----------|-----------|---------------+

| 68-12-2 |N,N-Dimethylformamide, for HPLC | | 200-679-5 |||

+----------------+--------------------------------------+----------+-----------+-----------+---------------+

Hazard Symbols: T

Risk Phrases: 20/21 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW

Harmful by inhalation and in contact with skin. Irritating to eyes.

May cause harm to the unborn child.Toxic.Combustible liquid.

Potential Health Effects

Eye:

Causes eye irritation.

Skin:

Causes skin irritation. Harmful if absorbed through the skin.

Substance is rapidly absorbed through the skin.

Ingestion:

Causes gastrointestinal irritation with nausea, vomiting and

diarrhea. May cause kidney damage. May cause liver damage.

Inhalation:

Harmful if inhaled. May cause respiratory tract irritation. May

cause effects similar to those described for ingestion.

Chronic:

Possible cancer hazard based on tests with laboratory animals.

Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:

Flush eyes with plenty of water for at least 15 minutes,

occasionally lifting the upper and lower eyelids. Get medical aid.

Skin:

Get medical aid immediately. Immediately flush skin with plenty of

water for at least 15 minutes while removing contaminated clothing

and shoes.

Ingestion:

Induce vomiting. If victim is conscious and alert, give 2-4 cupfuls

of milk or water. Never give anything by mouth to an unconscious

person. Get medical aid immediately.

Inhalation:

Get medical aid immediately. Remove from exposure and move to fresh

air immediately. If not breathing, give artificial respiration. If

breathing is difficult, give oxygen.

Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:

As in any fire, wear a self-contained breathing apparatus in

pressure-demand, MSHA/NIOSH (approved or equivalent), and full

protective gear. Will burn if involved in a fire.

Extinguishing Media:

Use water spray to cool fire-exposed containers. Use foam, dry

chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated

in Section 8.

Spills/Leaks:

Absorb spill with inert material (e.g. vermiculite, sand or earth),

then place in suitable container. Do not flush into a sewer. Remove

all sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:

Use only in a well-ventilated area. Use spark-proof tools and

explosion proof equipment. Avoid breathing dust, vapor, mist, or

gas. Avoid contact with skin and eyes. Use only in a chemical fume

hood.

Storage:

Keep away from sources of ignition. Store in a cool, dry place.

Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:

Facilities storing or utilizing this material should be equipped

with an eyewash facility and a safety shower.

Personal Protective Equipment

Eyes:

Wear safety glasses and chemical goggles if splashing

is possible.

Skin:

Wear appropriate protective gloves to prevent skin

exposure.

Clothing:

Wear appropriate protective clothing to minimize

contact with skin.

Respirators:

Follow the OSHA respirator regulations found in 29

CFR 1910.134 or European Standard EN 149. Always use

a NIOSH or European Standard EN 149 approved

respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid

Color: APHA: 5 max

Odor: amine-like - faint odor

pH: Not available.

Vapor Pressure: 4.9 mbar @ 20 C

Viscosity: 0.8 mPa s 20 deg C

Boiling Point: 153 deg C @ 760.00mm Hg

Freezing/Melting Point: -61 deg C

Autoignition Temperature: 445 deg C ( 833.00 deg F)

Flash Point:58 deg C ( 136.40 deg F)

Explosion Limits, lower:2.20 vol %

Explosion Limits, upper:16.00 vol %

Decomposition Temperature:

Solubility in water:soluble in water

Specific Gravity/Density: .9450g/cm3

Molecular Formula: HCON(CH3)2

Molecular Weight: 73.09

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:

Stable.

Conditions to Avoid:

Stable., incompatible materials, ignition sources.

Incompatibilities with Other Materials:

Oxidizing agents, reducing agents, acids, halogenated agents,

nitrates, chloroformates.

Hazardous Decomposition Products:

Carbon monoxide, oxides of nitrogen, carbon dioxide.

Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:

CAS# 68-12-2: LQ2100000

LD50/LC50:

CAS# 68-12-2: Inhalation, mouse: LC50 = 9400 mg/m3/2HInhalation,

rat: LC50 = 3421 ppm/1HInhalation, rat: LC50 = 3421 ppm/3H

Inhalation, rat: LC50 = 1948 ppm/4HOral, mouse: LD50 = 2900 mg/kg

Oral, rabbit: LD50 = 5 gm/kgOral, rat: LD50 = 2800 mg/kgSkin,

rabbit: LD50 = 4720 mg/kgSkin, rat: LD50 = >3.2 gm/kg.

Skin, rat: LD50 = 5 gm/kg

Carcinogenicity:

N,N-Dimethylformamide, for HPLC -

Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.

Other:

See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:

Damage to fish: Gold oland test: 18 hrs LC50: 500 mg/l

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA

Shipping Name: N,N-DIMETHYLFORMAMIDE

Hazard Class: 3

UN Number: 2265

Packing Group: III

IMO

Shipping Name: N,N-DIMETHYLFORMAMIDE

Hazard Class: 3

UN Number: 2265

Packing Group: III

RID/ADR

Shipping Name: N,N-DIMETHYLFORMAMIDE

Hazard Class: 3

UN Number: 2265

Packing group: III

USA RQ:CAS# 68-12-2: 100 lb final RQ45.4 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations

European Labeling in Accordance with EC Directives

Hazard Symbols: T

Risk Phrases:

R 61 May cause harm to the unborn child.

R 20/21 Harmful by inhalation and in contact with

skin.

R 36 Irritating to eyes.

Safety Phrases:

S 53 Avoid exposure - obtain special instructions

before use.

S 45 In case of accident or if you feel unwell, seek

medical advice immediately (show the label where

possible).

WGK (Water Danger/Protection)

CAS# 68-12-2: 1

United Kingdom Occupational Exposure Limits

CAS# 68-12-2: OES-United Kingdom, TWA 10 ppm TWA30 mg/m3 TWA

CAS# 68-12-2: OES-United Kingdom, STEL 20 ppm STEL61 mg/m3 STEL

United Kingdom Maximum Exposure Limits

Canada

CAS# 68-12-2 is listed on Canada's DSL List.

CAS# 68-12-2 is listed on Canada's Ingredient Disclosure List.

Exposure Limits

CAS# 68-12-2: OEL-AUSTRALIA:TWA 10 ppm (30 mg/m3)Skin

OEL-BELGIUM:TWA 10 ppm (30 mg/m3)Skin

OEL-CZECHOSLOVAKIA:TWA 30 mg/m3STEL 60 mg/m3

OEL-DENMARK:TWA 10 ppm (30 mg/m3)Skin

OEL-FINLAND:TWA 10 ppm (30 mg/m3)STEL 20 ppm (60 mg/m3)Skin

OEL-FRANCE:TWA 10 ppm (30 mg/m3)Skin

OEL-GERMANY:TWA 20 ppm (60 mg/m3)Skin

OEL-HUNGARY:TWA 10 mg/m3STEL 20 mg/m3Skin

OEL-JAPAN:TWA 10 ppm (30 mg/m3)Skin

OEL-THE NETHERLANDS:TWA 10 ppm (30 mg/m3)Skin

OEL-THE PHILIPPINES:TWA 10 ppm (30 mg/m3)Skin

OEL-POLAND:TWA 10 mg/m3

OEL-RUSSIA:TWA 10 ppmSTEL 10 mg/m3Skin

OEL-SWEDEN:TWA 10 ppm (30 mg/m3)STEL 15 ppm (45 mg/m3)Skin

OEL-SWITZERLAND:TWA 10 ppm (30 mg/m3)STEL 20 ppmSkin

OEL-TURKEY:TWA 10 ppm (30 mg/m3)Skin

OEL-UNITED KINGDOM:TWA 10 ppm (30 mg/m3)STEL 20 ppmSkin

OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV

OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV

US FEDERAL

TSCA

CAS# 68-12-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/16/1996 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best

information currently available to us. However, we make no warranty of

merchantability or any other warranty, express or implied, with respect to

such information, and we assume no liability resulting from its use. Users

should make their own investigations to determine the suitability of the

information for their particular purposes. In no way shall the company be

liable for any claims, losses, or damages of any third party or for lost

profits or any special, indirect, incidental, consequential or exemplary

damages, howsoever arising, even if the company has been advised of

the possibility of such damages.

----------------------------------------------------------------------

生产工艺：

1、硫酸催化合成DMF 不含富马酸二甲酯的干燥剂 硫酸作为催化剂是经典的合成法,产品收率可以达到92%〔4，8，9〕，虽然这种方法简单收率高，但是，由于硫酸的腐蚀性，会引起副反应，且有三废污染等缺点。 2、对甲苯磺酸催化合成DMF 甲苯磺酸作为催化剂合成DMF，产品产率为67%左右。对甲苯磺酸是一种有机酸，虽然其对设备的腐蚀性和三废比较少、不易引起副反应、产品色泽好、价廉易得、易于保存运输和使用，用量少，活性高，但是产率比较低等缺点。 3、树脂催化合成DMF 强酸性阳离子交换树脂早在20世纪50年代就开始用于一些酯化反应中，生成的酯色度低，后处理方便，可重复使用，对设备无腐蚀性，不产生三废，极有工业使用价值。使用强酸性离子交换树脂作为催化剂合成DMF，其产率可达到91.4%。 4、固体超强酸催化合成DMF 固体超强酸催化合成富马酸二甲酯超强酸是酸强度比100%硫酸更强的酸。固体超强酸具有不腐蚀设备、不污染环境、不怕水、耐高温、反应活性高、选择性好、制造容易、在反应体系中易分离、不易中毒等优点,同时可以重复使用,因而具有一定的工业应用价值。 5、氯化铁催化合成DMF 谱尼测试提供富马酸二甲酯检测服务 结晶氯化铁催化合成富马酸二甲酯结晶氯化铁（FeCI3•6H2O）是一种价廉易得的化合物，利用它催化合成富马酸二甲酯，腐蚀小，三废污染较轻，操作方便，有一定应用价值,其有利应用条件是：当催化剂0.8g，富马酸58g，甲醇20ml，，即摩尔比为0.06∶1∶10，回流4h，得白色结晶产品，收率达61.7%〔13〕。 6、杂多酸催化合成DMF 杂多酸是由两种以上无机含氧酸缩合而成的多元酸,它不仅具有多元酸和多电子还原能力,而且其酸性和氢化还原性可以通过变换组成元素在很大范围内系统地调节。它对许多反应具有高的催化活性和选择性,并且不挥发,对热稳定、污染少、可以大大减轻对设备的腐蚀,能够再生和重复使用。 7、稀土化合物催化合成DMF 稀土化合物是我国易得、资源丰富的化合物,开发稀土化合物的利用很有经济价值。李晓莉等利用三氧化二钕(Nd2O3)催化合成了富马酸二甲酯，当15g富马酸,30ml甲醇，三氧化二钕用量为3%，回流4h，得产品收率90%〔15〕。 8、BF3•(C2H5)2O催化合成DMF 三氟化硼(BF3)是强的电子接受体，强的Lewis酸，能够与供电子的羧酸中羧基形成复合物，使羧基中的碳带更多的正电荷，但BF3是气体，故催化酯化反应的进行，常利用其与醇或醛等形成钅羊盐而使用。

看看多来点分吧 ， hehe 多多益善啊 嘿嘿