富士xa5和富士xt100参数对比

5, water curtain spray booth and dust-proof room

How it works: In the spraying process, the room air distribution inside the lower part of the horizontal exhaust filter, formed by the overflow trough overflow water curtain and sink of water in front of the mist, mist curtain or sink hit the water surface will be adsorbed , accumulate in the tank, coagulant chemical treatment by the mist, so that paint residue on the surface of the sink float back to the sedimentation tank clean up regularly. Not met by the water curtain curtain of mist into the spray chamber the lower back, the mist from the nozzle, washing, filtering and folding folding maze board three times a filtered spray systems, exhaust fan venting to the atmosphere by , the structural features are as follows:

1, set the duplex curtain spray booth.

2, tank using steel and Q235 steel production, thickness 4mm. Curtain plate stainless steel plate, spray nozzle for the spray nozzle to capture, exhaust fan with explosion-proof fan.

3, chamber body assembly plate connection between the use of bolts, installation, removal, fast and convenient.

4, configuration, special explosion-proof spray room lighting, interior lighting sufficient light.

5 mist treatment with water curtain, shower folding capture plus maze can efficiently remove the paint mist.

6, circulation pump with an area of small, simple installation and pipeline pumps.

7, Room δ1.5mm steel and steel body is made of.

8, dust chamber body is made of EPS board, has entered out.

9, water curtain spray booth technical parameters (ie single)

No Item Parameters

A flow rate (m3 / h) 9000

2 Power (KW) 4

3 pump power (KW) 3

4 open wind speed (m / s) 0.6-0.7

5 Compressed air consumption (m3/min) 0.3

6 lamp illumination (Lx) 400

Z-7 nozzle

8 Painting Room: Dimensions (L × W × H) 2500 × 2400 × 2600 (mm)

9 Dust Room: Dimensions (L × W × H) 2500 × 1800 × 3400 (mm)

Note: Manual spray system uses high-quality brand-name products in Taiwan.

6, leveling Room

Leveling effect of room to spray paint surface after the paint on the share level, and to a number of solvent evaporation in order to prevent baking too quickly appeared in the film pinhole.

1, Room body is made of welded steel and steel plate.

2, chamber body wall windows with transparent glass observation and maintenance of the door.

3, chamber body with the top emission device, keeping indoor air fresh.

4, room spray processing site in vivo, uniform color, elegant appearance.

3, the consolidated statement

a, baking oven is designed to bridge Road. It consists of furnace body, hot air circulation unit, the furnace temperature control system of emission devices and so on. Furnace structure, advanced technical design, beautiful appearance, it has good insulation effect, the temperature difference is small, fast heating, energy saving. According to film drying characteristics of endothelial plate galvanized steel furnace, look for the special corrugated steel plate.

b, furnace set a zero-emission devices, exhaust system parts located at the entrances to the outside row of more than 1m above the roof and be equipped with rain cover. Ensure that the workshop environment and health of workers labor.

c, furnace insulation materials of high quality mineral wool, thickness 150mm, bulk density 100kg/m3. Circulating air duct of high quality rock wool, thickness 100mm, bulk density 100kg/m3. To ensure that the furnace temperature uniformity, temperature ≤ ± 5 ℃.

d, heating with natural gas furnace, with high thermal efficiency, heating and cooling, long life and easy maintenance. When heated from room temperature to set the temperature rose to the heating time less than 45 minutes, thus ensuring the full range of productivity.

e, hot air circulation device is a high temperature, adjustable air volume, low noise plug-in fanhot air circulation wind control gateloop heat pipe and air filter and other components. Role is to form the hot air furnace under the air suction, air flow circulation, temperature uniformity, temperature ≤ ± 5 ℃. Ensure that the workpiece even heat and color, to meet the product quality should be.

f, temperature control is used to control the furnace temperature controller temperature, with temperature, long life, high sensitivity instrument, using easy to operate.

8, hanging conveyor

1 line with XT100 type, single point lifting 120Kg, design chain for the 0.5-2.5m/min adjustable speed to meet production requirements.

2, the device with electrical and mechanical protection. When the hanging chain overload or mechanical failure will automatically stop running, audible and visual alarm signals to automatically turn off the power, in order to avoid equipment accident. Same motor with overload, over current, over voltage, phase, leakage and other protection.

3, the device has a stable and reliable, jitter-free card lag phenomenon.

4, the device installed, depend on the furnace and auxiliary furnace skeleton profiles, furnace used □ 120 × 120 shaped timber processed into cantilever cranes, pylons connected by rail.

5, in the drying channel configuration flexibility and full range of rail track tension device, which will help the chain expansion and contraction.

6, commissioning across the board after the hanging chain in the case of full load, running smooth, safe and reliable, no shaking.

7, transport conditions

比如 SHIMANO HG-93 XT链条 只有110节

SHIMANO-HG53链条 适合8/9速, 有112节

KMC X9 9速链条 有116节 看这些商品 即便是不同的节数 但是也都能用于同一速别

KMC X10 10速链条也是116节

具体每一节的 宽窄 和长短 分类 6-7速 是一类 8-9速 是一类 10速一类

但是有的 链条也注明的 了可以6-7-8 速用 有的可以8-9-10同用但是有的比如

KMC 每一速 都有专用的链条

按照等级排列XTR属于最高等级，竞赛级。从高到低的名称依次是：XTR、XT、SLX、Deore、Alivio、Acera、Altus、Tourney，而XT比XTR低一个等级。

XTR是做给职业队和专业人士使用的，更注重的是更轻，阻力更小，更强，更好的可靠性。其实用的技术是其公司最先进的，材料也是最好的。

m系列微单的专用镜头一共也没有几只，很多情况下需要转接单反镜头（最典型的问题就是多年来始终没有专用的人像镜头）。二是XT100本身是有电子取景器的，出门使用时会比较方便。M6的话需要另配（不太推荐），当然你也可以选择m50，m50和m6一样都简化自m5，只是去除的功能设计不同。三是XT100的机身明显颜值更高。

XT100的问题，一是富士的镜头都不错但也都不便宜，二是富士的入门机型和富士的主力机型操控不一样，三是XT100的4K视频功能就是个摆设，没有实用意义，当然佳能M6都没有4K支持。

标准的小套件包括：变速系统（前、后指拨，前拨、后拨）

标准的中套件包括：变速系统（前、后指拨，前拨、后拨），传动系统（牙盘组件，飞轮组件，链条）。

标准的大套件包括：变速系统（前、后指拨，前拨、后拨），传动系统（牙盘组件，飞轮组件，链条），刹车系统，花鼓。