建材秒知道
登录
建材号 > 有色金属 > 正文

上海今日铜矿价多少钱一吨

淡然的含羞草
狂野的诺言
2022-12-22 08:49:35

上海废铜多少钱一斤回收?

最佳答案
霸气的鸵鸟
清爽的草丛
2025-08-26 13:30:11

12月13日上海废铜回收价格

二号铜 57300 价格单位 元/吨 涨跌额 -100

马达铜 57300

破碎黄铜 41100

黄杂铜 40100

1#光亮铜线 61000

H62黄铜边料 44800

H65黄铜边料 46200

最新回答
开放的抽屉
眯眯眼的保温杯
2025-08-26 13:30:11

黄铜矿与硫酸铁反应变成硫酸亚铁。化学方程式是Fe2(SO4)3+Cu=2FeSO4+CuSO4,硫酸铁中的铁为三价铁离子,呈黄色,铜将三价铁还原成二价铁,硫酸亚铁溶液呈浅绿色,硫酸铜溶液蓝色,黄色变蓝绿色。

优美的麦片
辛勤的长颈鹿
2025-08-26 13:30:11
高含泥氧化铜矿水洗-分级堆浸工艺

王少勇吴爱祥王洪江尹升华顾晓春

【摘 要】通过室内实验分析高泥矿堆渗透性影响因素,探明入堆颗粒粒径、颗粒结构、泥质对浸堆渗透性的影响规律。结果表明:−1 mm的粒级的物料对浸堆渗透性具有恶化作用,去除后浸堆的渗透系数可增加19~47倍;入堆颗粒粒径与矿堆渗透系数呈二阶指数函数关系,当粒径小于10 mm时,渗透系数随粒径增大而缓慢增加;当粒径大于10 mm时,渗透系数随着粒径的增大而迅速增加。最后,提出采用水洗−分级工艺将−1 mm粒级物料进行槽浸和搅拌浸出,将+1~−5 mm和+5~−25 mm的物料进行分级筑堆、分区喷淋的堆浸方式。采用此工艺后,浸堆的渗透系数增加为原矿的8~50倍,综合浸出率由不到10%提高到63.98%,使高含泥氧化铜矿得到成功堆浸。%The factors which affect the permeability of high­clay heap were analyzed. The laws of permeability affected by particle nature, particle structure and gain size were discussed through room experiments. The results show that the ore particles with size of −1 mm play worsen effect on permeability. After removing these particles, the coefficient of permeability will increase by 19−47 times; exponential function relation is also found between particle diameter and permeability coefficient of permeability. When the size is less than 10 mm, the permeability coefficient increases slowly;when the size is bigger than 10 mm, the permeability increases quickly. Finally, the craft of wash­classification is brought, which is consisted of that the ore particles with size of −1 mm are in tank leaching and agitation leaching, the ore particles with sizes of+1−−5 mm and+5−−25 mm are in heap leaching with classification dump and partition liquid arrangement. After the craft is used, the permeability coefficient of heap is 8−50 times as that of crude ore, and the comprehensive leaching rate increases from 10%up to 63.98%. The high­clay copper oxide ore is leached successfully.

清脆的钢笔
乐观的鸡翅
2025-08-26 13:30:11
上海帝豪电焊机250含铜量是13-16公斤。根据查询相关资料信息,电焊机250指的是最大电流250安培,大概功率10KW左右,BX-250电焊机功率16KW,里面大概有13-16公斤左右的铜线。