你好 我想问下煤炭机械类的期刊有哪些 哪些是核心哪些是非核心 有没有详细资料

COAL -- A Fossil Fuel

How Coal Was Formed

How We Get Coal

How Coal is Transported

Types of Coal

Where We Get Coal

How Coal is Used

Coal and the Environment

energy calculator

links page

recent statistics

HOW COAL WAS FORMED

Coal is a combustible black or brownish-black sedimentary rock composed mostly of carbon and hydrocarbons. It is the most abundant fossil fuel produced in the United States.

Coal is a nonrenewable energy source because it takes millions of years to create. The energy in coal comes from the energy stored by plants that lived hundreds of millions of years ago, when the earth was partly covered with swampy forests. For millions of years, a layer of dead plants at the bottom of the swamps was covered by layers of water and dirt, trapping the energy of the dead plants. The heat and pressure from the top layers helped the plant remains turn into what we today call coal.

HOW WE GET COAL

Mining the Coal

Coal miners use giant machines to remove coal from the ground. They use two methods: surface or underground mining. Many U.S. coal beds are very near the ground's surface, and about two-thirds of coal production comes from surface mines. Modern mining methods allow us to easily reach most of our coal reserves. Due to growth in surface mining and improved mining technology, the amount of coal produced by one miner in one hour has more than tripled since 1978.

Surface mining is used to produce most of the coal in the U.S. because it is less expensive than underground mining. Surface mining can be used when the coal is buried less than 200 feet underground. In surface mining, giant machines remove the top-soil and layers of rock to expose large beds of coal. Once the mining is finished, the dirt and rock are returned to the pit, the topsoil is replaced, and the area is replanted. The land can then be used for croplands, wildlife habitats, recreation, or offices or stores.

Underground mining, sometimes called deep mining, is used when the coal is buried several hundred feet below the surface. Some underground mines are 1,000 feet deep. To remove coal in these underground mines, miners ride elevators down deep mine shafts where they run machines that dig out the coal. Read about a visit to a real underground coal mine.

Processing the Coal

After coal comes out of the ground, it typically goes on a conveyor belt to a preparation plant that is located at the mining site. The plant cleans and processes coal to remove dirt, rock, ash, sulfur, and other unwanted materials, increasing the heating value of the coal.

TRANSPORTING COAL

After coal is mined and processed, it is ready to be shipped to market. The cost of shipping coal can cost more than the cost of mining it.

Most coal is transported by train, but coal can also be transported by barge, ship, truck, and even pipeline. Almost 60 percent of coal in the U.S. is transported, for at least part of its trip to market, by train. It is cheaper to transport coal on river barges, but barges cannot take coal everywhere that it needs to go. If the coal will be used near the coal mine, it can be moved by trucks and conveyors. Coal can also be crushed, mixed with water, and sent through a "slurry" pipeline. Sometimes, coal-fired electric power plants are built near coal mines to lower transportation costs.

TYPES OF COAL

Coal is classified into four main types, or ranks (lignite, subbituminous, bituminous, anthracite), depending on the amounts and types of carbon it contains and on the amount of heat energy it can produce. The rank of a deposit of coal depends on the pressure and heat acting on the plant debris as it sank deeper and deeper over millions of years. For the most part, the higher ranks of coal contain more heat-producing energy.

Lignite is the lowest rank of coal with the lowest energy content. Lignites tend to be relatively young coal deposits that were not subjected to extreme heat or pressure. Lignite is crumbly and has high moisture content. About eight percent of the coal produced in the United States is lignite, and most of it comes from Texas and North Dakota. Lignite is mainly burned at power plants to generate electricity.

Subbituminous coal has a higher heating value than lignite. Subbituminous coal typically contains 35-45 percent carbon, compared to 25-35 percent for lignite. Most subbituminous coal in the U.S. is at least 100 million years old. Over 40 percent of the coal produced in the United States is subbituminous.

Bituminous coal contains 45-86 percent carbon, and has two to three times the heating value of lignite. Bituminous coal was formed under high heat and pressure. Bituminous coal in the United States is between 100 to 300 million years old. It is the most abundant rank of coal found in the United States, accounting for about half of U.S. coal production. Bituminous coal is used to generate electricity and is an important fuel and raw material for the steel and iron industries.

Anthracite contains 86-97 percent carbon and its heating value is slightly lower than bituminous coal. Anthracite is very rare in the United States. The only anthracite mines in the United States are located in northeastern Pennsylvania.

WHERe WE GET COAL

Coal reseves are beds of coal still in the ground waiting to be mined. The United States has the world's largest known coal reserves, about 275 billion short tons. This is enough coal to last over two hundred years at today's level of use.

Coal production is the amount of coal that is mined and sent to market. The United States produces over a billion short tons of coal each year, over 1/5 of the world's coal. Coal is mined in 27 states. Wyoming mines the most coal, followed by West Virginia, Kentucky, Pennsylvania, and Texas. Coal is mainly found in three large regions, the Appalachian Coal Region, the Interior Coal Region, and Western Coal Region (includes the Powder River Basin).

Coal Production in Three Regions

2004

Appalachian Coal Region:

Annually produces about 35% of total U.S. coal production.

Large underground mines and small surface mines.

Coal mined in the Appalachian coal region is primarily used for steam generation for electricity, metal production, and for export.

Interior Coal Region:

Annually produces approximately 13% of total U.S. coal production.

Mid-sized surface mines.

Mid- to large-sized companies.

Western Coal Region:

Annually produces about 52% of total U.S. coal production.

The State of Wyoming (number one coal state) accounts for over 30% of total U.S. coal production.

Large surface mines.

Largest coal mines in the world.

HOW COAL IS USED

Over 90 percent of the coal used in the United States is used to generate electricity. It's also used as a basic energy source in many industries, including, steel, cement and paper. The four major uses of coal are:

FOR ELECTRIC POWER

Coal is used to generate more than half of all electricity produced in the United States. Besides electric utility companies, industries and businesses with their own power plants use coal to generate electricity. Power plants burn coal to make steam. The steam turns turbines which generate electricity.

FOR INDUSTRY

A variety of industries use coal's heat and by-products. Separated ingredients of coal (such as methanol and ethylene) are used in making plastics, tar, synthetic fibers, fertilizers, and medicines. The concrete and paper industries also burn large amounts of coal. Industrial consumers use over 7 percent of the coal mined in the United States.

FOR MAKING STEEL

Coal is baked in hot furnaces to make coke, which is used to smelt iron ore into iron needed for making steel. It is the very high temperatures created from the use of coke that gives steel the strength and flexibility for products such as bridges, buildings, and automobiles.

FOR EXPORT

In 2004, 48 million short tons, about 4 percent of the coal produced in the United States, was exported to other countries. Coal is exported to many different countries, but most trade is with Canada, Europe, and Brazil. More than half of coal exports are used for making steel. Read about a visit to a coal export facility. Coal exports have been generally shrinking in the past 10 years, while the amount of coal imported from other countries has been growing. In 2004, 27 million short tons of coal were imported from other countries. Most of these imports were shipped to electric power producers along the U.S. coastlines.

COAL AND THE ENVIRONMENT

Environmental laws and modern technologies have greatly reduced coal's impact on the environment. Without proper care, mining can destroy land and pollute water. Today, restoring the land damaged by surface mining is an important part of the mining process. Because mining activities often come into contact with water resources, coal producers must also go to great efforts to prevent damage to ground and surface waters.

When coal is burned as fuel, it gives off carbon dioxide, the main greenhouse gas that is linked with global warming. Burning coal also produces emissions, such as sulfur, nitrogen oxide (NOx), and mercury, that can pollute the air and water. Sulfur mixes with oxygen to form sulfur dioxide (SO2), a chemical that can affect trees and water when it combines with moisture to produce acid rain. Emissions of nitrogen oxide help create smog, and also contribute to acid rain. Mercury that is released into the air eventually settles in water. The mercury in the water can build up in fish and shellfish, and can be harmful to animals and people who eat them. The Clean Air Act and the Clean Water Act require industries to reduce pollutants released into the air and the water.

The coal industry has found several ways to reduce sulfur, nitrogen oxides, and other impurities from coal. They have found more effective ways of cleaning coal before it leaves the mine, and coal companies look for low-sulfur coal to mine. Power plants use "scrubbers" to clean sulfur from the smoke before it leaves their smokestacks. In addition, industry and government have cooperated to develop "clean coal technologies" that either remove sulfur and nitrogen oxides from coal, or convert coal to a gas or liquid fuel. The scrubbers and NOx removal equipment are also able to reduce mercury emissions from some types of coal. Scientists are working on new ways to reduce mercury emissions from coal-burning power plants, since the Environmental Protection Agency (EPA) has set tighter mercury limits for the future.

EI：工程索引

（The Engineering Index，EI）创刊于1884年，是美国工程信息公司（Engineering information Inc.）出版的著名工程技术类综合性检索工具。Ei Compendex是全世界最早的工程文摘来源。Ei Compendex数据库每年新增的50万条文摘索引信息分别来自5100种工程期刊、会议文集和技术报告。Ei Compendex收录的文献涵盖了所有的工程领域，其中大约22%为会议文献，90%的文献语种是英文。

煤炭方面的杂志

长春煤炭管理干部学院学报 CN22-1311/TK

江西煤炭科技 CN36-1121/TD

煤炭高等教育 CN32-1365/G4

煤炭工程 CN11-4658/TD

煤炭技术CN 23-1393/TD

煤炭加工与综合利用 CN11-2627/TD

煤炭经济研究CN 11-1038/F

煤炭科技 CN32-1491/TD

煤炭科学技术 CN11-2402/TD

煤炭学报 CN11-2190/TD

煤炭学报(英文版) CN11-3747/TD

煤炭转化 CN14-1163/TQ

内蒙古煤炭经济 CN15-1115/F

山东煤炭科技 CN37-1236/TD

山西煤炭 CN14-1096/TD

山西煤炭管理干部学院学报CN 14-1247/D

陕西煤炭 CN61-1382/TD

中国煤炭CN11-3621/TD

中国煤炭(英文版) CN11-3622/TD

中国煤炭地质 CN13-1385/TD

中国煤炭工业CN11-5593/F

中国煤炭工业年鉴 CN11-4108/TD

中国煤炭工业医学杂志 CN13-1221/R

中州煤炭CN 41-1087/TD

版面费要根据具体刊物来说了，省级、国家级和核心的，价格差不少呢

http://www.bakerhughes.com/bakerhughes/inDepth/naturalgas_eandp.htm

http://www.pall.com/articles_chemical_5205.asp

全是英文的，他们好像都不是什么杂志，但好像都很有用。

lz慢慢看。

这个是以前 煤炭学报 的英文版，中文版是核心里面不错的。

英文版貌似还没有被SCI收录吧（请以最新的收录为准）

《煤炭转化》ISSN：1004-4248CN：14-1163/TQ

《硅酸盐通报》ISSN：1001-1625CN：11-5440/TQ

排灌机械Drainage and Irrigation Machinery 简写DIM

剩下的就不知道了

可能会全＋上是比较昂贵的，就不会像*【壹品】    

现在主要是看质量，在于通过率好不好*【优刊】